How to Choose Epoxy Coated Mesh for Filters and Screens

Nov. 10, 2026

Epoxy coated mesh is best selected by the opening pattern, wire diameter, substrate, coating purpose and working environment. Our range includes Q195 and 5154A (H39) options for hydraulic filters, air filtration and window screens, with widths from 20 mm to 1250 mm and roll lengths from 30 m to 914 m. Match the mesh specification to the fluid, temperature and forming requirement before requesting a quote.

Illustration: How to Choose Epoxy Coated Mesh for Filters and Screens
Illustration for reference; see the product page for actual photos and specifications.
01

Opening pattern and wire diameter must match the filter or screen design, forming route and available space.

02

Substrate and coating purpose must fit the application: Q195 with oil-resistant coating for hydraulic options, or 5154A (H39) with weatherproof coating for air filtration and window-screen options.

03

Operating temperature, roll width and roll length must fit the working environment and production layout.

Start with the working environment

Choose the coating and substrate around the environment first. Our epoxy coated mesh is used as a support layer in hydraulic and air filters, and it can also be made into screens. Through controlled heating, epoxy powder melts and forms a dense protective layer that adheres to the mesh. This construction suits filter production where the support material must be formed into an element.

For hydraulic filtration, our options use Q195 substrate with black or white oil-resistant coating. The air-filtration option uses 5154A (H39) with gray weatherproof coating. A 5154A (H39) option with black weatherproof coating is available for window screens. Start with the application because the substrate and coating purpose change with the working environment.

Temperature is an important screening point. Epoxy coating is specified for -30°C to 120°C, while normal PVC coating is specified for -15°C to 60°C. If your filter or screen will operate outside the epoxy range, include the actual minimum and maximum temperature in your inquiry so we can assess the configuration.

Match opening size and wire diameter to the filter job

The opening pattern and wire diameter determine how the mesh fits the filter design, forming route and available space. Our hydraulic choices include 18 x 14 mesh with 0.18 mm wire, 18 x 14 mesh with T0.18 wire, 12 x 10 mesh with 0.254 mm wire, and 22 x 20 mesh with 0.18 mm wire. The air-filtration option is 17 x 15 mesh with 0.26 mm wire. The window-screen option is 18 x 15 mesh with 0.28 mm wire.

Use the opening pattern as the starting point for a replacement or new filter design. Then check the wire diameter against the forming process and the space available in the filter element. Changing from 18 x 14/0.18 to 12 x 10/0.254 changes both the opening arrangement and wire size, so match the mesh to the element drawing instead of ordering by coating color alone.

Picture a hydraulic filter element being cut and formed from a roll. The selected mesh needs to fit the intended support pattern, element width and forming route. Send the mesh pattern, wire diameter and finished part dimensions together when you ask us to confirm a suitable roll.

Select the substrate and coating for the application

Q195 is the starting point for the hydraulic configurations. It is paired with black or white oil-resistant coating and is available in several opening and wire combinations. These choices suit hydraulic filter production where oil resistance is part of the purchasing requirement.

5154A (H39) is used in the air-filtration and window-screen configurations. The gray weatherproof version is for air filtration, while the black weatherproof version is for window screens. The black oil-resistant 5154A (H39) option is for hydraulics with an 18 x 14 opening pattern and 0.21 mm wire.

Color helps identify a configuration, but it should not replace the application requirement. Black appears in both oil-resistant and weatherproof options. Put the intended use, fluid or outdoor exposure, substrate preference and mesh specification in the purchase inquiry so the color is tied to the correct coating purpose.

Check roll width and length before ordering

Our epoxy coated mesh options have widths from 20 mm to 1250 mm and lengths from 30 m to 914 m. The right combination depends on the finished element layout and cutting plan.

Measure the required strip width from the filter drawing, including the cutting or forming allowance used in your process. A narrow strip may reduce waste for a small element, while a wider roll may suit a production line that cuts several parts across the material. Roll length affects how often your team changes rolls, so send expected usage with the required width and length.

We can make customized products according to the working environment. Include the required width, roll length, opening pattern, wire diameter, substrate, coating purpose and application when requesting a quotation from Anping Yinrun Wire Mesh Co.,Ltd.

Prepare the specification for a quotation

Choose the Q195 oil-resistant configurations for the hydraulic applications described here. Choose the 5154A (H39) gray weatherproof configuration for air filtration, or the black weatherproof configuration for window screens. Review our Epoxy Coated Mesh range, then send the application, opening pattern, wire diameter, substrate, coating, width, roll length and operating temperature for a quotation.

The company

Anping Yinrun Wire Mesh Co.,Ltd

YINRUN dedicates to delivering high-quality products to the market and continuously improving our customers' experience. Sacrificing quality for low prices has never been our choice. Even in today's highly competitive market, relying our self-production and after-sales advantage, we will continue to serve our global customers with this standard.

About Us ↗Visit company website ↗

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.